Description
Summary:
Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service.
Key Features:
- Superior performance at depths to water of 100′ or less
- Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
- Ready-to-install 230 volt motor – see manual for 115 volt conversion
Details:
Body Construction | Thermoplastic |
Horsepower | 3/4 HP |
Maximum Capacity | 15.3 GPM (shallow well) |
Flow at 10′ Lift and 40 PSI | 13.8 GPM (shallow well) |
Max Lift | 25′ (shallow well) / 100′ for 4″ deep setup |
Max Pressure | 52 PSI (deep well) / 66 PSI for 4″ deep setup |
Pressure Switch Setting | 30/50 |
Suction Pipe Size | 1-1/4″ NPT |
Discharge Pipe Size | 1″ NPT |
AMP Draw (full load) | 6.1 amps on 230V / 12.2 amps on 115v |
Voltage | 230v/115v, 60 Hz |
Recommended Breaker | 15 amps on 230v / 20 amps on 115v |
Maximum Temperature | 140 °F (60 °C) |
For more information, please view the following: